CASCADE 0.9.3 (Emulator device CarmanScan 1 and HiScan Pro) for USB KL-Line adapter.

CASCADE - This emulator Multibranded , automotive scanner Hi-Scan Pro ( aka CarmanScan 1) allows you to run the software of this device to a PC and diagnose the vehicle using an ordinary USB KL-Line adapter.
Hi-Scan Pro ( aka CarmanScan 1) - Scanner dealer level for KIA and Hyundai.
and is a multi-brand scanner for the following brands.

Asia: Toyota, Lexus, Honda, Nissan, Mitsubishi, Proton, Mazda, Subaru, Suzuki, Isuzu, Infiniti, Holden, Daewoo, Ssangyong

Europe: Benz, BMW, Audi, Volkswagen, Saab, Opel, Renault, Peugeot, Citroen

USA: General Motors, Chrysler, Ford.

Extras. information:
No additional configuration and manipulation is required. The program starts clinging to the FTDI driver and automatically detects the type of interface (KL-Line or K CAN).
Button REC / PLAY / STOP / Load state / Save state - does not work I will bring the lack of functionality in this version programmy. - ATTENTION: The developer is strongly recommended to use this software for reprogramminga.

Note!
In the lower right corner of the program is the field of K-Line and below the pin numbers 16ti pin OBD2 connector.
When you run the diagnostic program will light green that contact which throws CarmanScan K line.
And as in any shoestring USB KL-Line or USB K CAN / K DCAN to the line is always displayed on the 7th contact , you have to flip to the line handles to the desired contact.

Year / Date of Release: 2011
Version: 0.9.3
System Requirements : 800 MHz x 86 running Windows XP or Windows 7.
Universal Interface USB KL-Line on the chip FTDI ( for vehicles with a line of diagnostic KL), or USB K CAN / K DCAN on-chip FTDI ( for vehicles with the line diagnostics and KL CAN)
Language : English Russian